Bids and designs have begun pouring in for President Trump’s southern border wall.

The designs, featured in a recent Wall Street Journal article, answer president Trump’s call for a “big, beautiful” wall along the US-Mexico border, and honor requests from the DHS that it be “at least 18 feet high” and “aesthetically appealing in color.”

Here’s a glimpse of the designs, as reported last week by Zero Hedge:

“As Pretty as the Parthenon”


RENDERING BY CRISIS RESOLUTION SECURITY SERVICES, INC.

WHO Crisis Resolution Security Services of Clarence, Ill., a global security management firm

DESIGN CRSS says the wall is meant to evoke famous walls in history, using crenellations, parapets and buttresses, and would be “as pretty as the Parthenon.” The wall would be built on a 30-foot-high dirt berm, graded to prevent vehicles from approaching. It also would follow existing interior roads and highways, which the company says would make it easier to transport materials and to maintain, while avoiding private-property issues. It would also create a wide zone in some places between the wall and the border. Bridges and gates would allow the inhabitants of that zone to cross.

* * *

Doubling as Nuclear Waste Facility


RENDERING BY CLAYTON INDUSTRIES

WHO Clayton Industries of Pittsburgh

DESIGN Owner Christian Clayton has proposed devising a wall that would carry electricity generated from municipal, medical and nuclear waste. “The wall is just a building block,” Mr. Clayton said. “Think of the wall as big conduit.” Mr. Clayton declined to detail many specifics of his plan, which would involve plants to convert the waste into power. Spent nuclear fuel rods and other waste would be buried 100 feet deep in a buffer zone between the border and the wall.

* * *

At an Angle


RENDERING BY CHANLIN INC.

WHO Chanlin Inc., of Middle River, Minn., a steel-fabrication construction company

DESIGN Chanlin’s design for a concrete wall consists of using 10-foot-wide by 30-foot-high panels with embedded steel plates welded in a vertical position. To prevent climbing or scaling with a hook, the design would be tilted 30 degrees toward Mexico and include a smooth concrete finish with a steel cap plate. Steel bars would allow border patrol to be able to see through the fence.

* * *

Design Beyond Reach


DRAWINGS BY J.M. DESIGN STUDIO

WHO J.M. Design Studio of Pittsburgh, an all-women team of designers and artists

DESIGN In a submission meant to protest the project, J.M. Design Studio’s proposals are designed to “invite other realms of thought and consideration.” One sketch shows nearly three million hammocks, for anyone’s use, strung across the border with 30-foot trees for support. Another one has a semicontinuous wall of nearly 10 million 30-foot-tall pipe organs, with openings every 20 feet allowing for people to pass through. Jennifer Meridian, a Pittsburgh artist involved in the submissions, called the actual border wall project “preposterous for so many reasons.”

* * *

Memorial Wall


RENDERINGS BY REILLY CONSTRUCTION

WHO Reilly Construction and Croell Inc., both of Iowa

DESIGN This joint venture would use tilt-slab construction consisting of concrete with reinforced fibers that the company says would make the wall more durable and resistant to damage. The panels would be 30 feet high and 15 feet wide with a footing underground to prevent tunneling. The concrete material could be engraved, colored or etched to make it more aesthetically appealing or should there be an interest in establishing a memorial in some places.

* * *

Hadrian’s Wall


HADRIAN CONSTRUCTION

WHO Hadrian Construction Co. of Carlsbad, Calif.

DESIGN Company owner Rod Hadrian says his prefabricated product would make the wall cheaper and easier to install in remote border areas. The tridipanel wall system could be made to any thickness or color, and the diagonal pattern is meant to give the wall extra strength.

* * *

One-Way Visibility


RENDERING BY MICHAEL EVANGELISTA-YSASAGA, PENNA GROUP

WHO Penna Group of Fort Worth, Texas

DESIGN Penna Group’s proposal is for a double wire mesh fence that has a sheet of plexiglass lined with a one-way mirror allowing border patrol agents to see the Mexico side, but not the reverse. The fence would be 30 feet tall with a 6-foot footing, and both would be designed to sustain tampering by pickaxes, hammers, hand-tools, and torches for over an hour and a half. The double-lined, double-wire mesh design is often used in maximum-security prisons.

* * *

Perch


SAN DIEGO PROJECT MANAGEMENT, PSC

WHO San Diego Project Management, PSC, a full-service design-build organization

DESIGN This firm submitted a design for a wall similar to the ones used to protect medieval castles in Europe, according to the company. Most notably, the proposal includes a walkway on top called a “chemin de ronde” that allows for border agents to see Mexico through optical ports.

* * *

Camouflage


RENDERING BY CONCRETE CONTRACTORS INTERSTATE, SINGLE EAGLE INC.

WHO Single Eagle Inc. of Poway, Calif., a structural and decorative concrete specialist

DESIGN This proposal has a design option that could incorporate artistic representations of local cultures. The walls are built using a tilt-up method that is cast onsite and then put into position, making it easier to built the wall in remote areas.

* * *

Sensors


RENDERING BY DARKPULSE TECHNOLOGIES INC.

WHO DarkPulse Technologies, based in Arizona and New York

DESIGN Ballistic concrete is used, which the company says could withstand more than 12 hours of tampering. Using sensors, the wall and below-ground structure would notify border agents of the exact location of any tampering in real time. The wall would also include coating designed to prevent climbing and the use of grappling hooks.

* * *

Technology First


RENDERING BY VSCENARIO

WHO vScenario, a San Diego construction-technology company

DESIGN vScenario’s design would begin by using drones to develop a 3-D spatial model of the terrain. The proposed wall would feature cameras, volumetric microwave sensors and fiberoptics designed to detect intrusions.

* * *

Fitting In


WTC CONSTRUCTION

WHO WTC Construction

DESIGN This design aims to mimic a “rammed-Earth” construction style, which uses natural raw materials. The goal is a wall designed to look like an “extension of the surrounding landscape,” says the company. The system would include panels attached to reinforced concrete piers nested together to form a solid structure.

* * *

Mesh Fencing


RIVERDALE MILLS

WHO Riverdale Mills of Northbridge, Mass.

DESIGN A galvanized welded wire mesh called WireWall, which the company says is virtually impossible to climb or cut. The company’s fencing is in use along the U.S.-Mexico border in California, as seen above. The fencing could be up to 20 feet tall and could be installed to reach 6 feet below ground.

* * *

A Twist on Steel


HELIX STEEL

WHO Helix Steel, a unit of Pensmore Reinforcement Technologies, of Ann Arbor, Mich., and Leesburg, Va.

DESIGN Helix would mix concrete with its Twisted Steel Micro Rebar, a reinforcement designed to prevent cracking. The material is now used at some residential and commercial sites.

In a Fox News appearance with Sean Hannity Tuesday, Attorney General Jeff Sessions said the battle in Congress seeking federal funding for the wall would ultimately be won in favor of the Trump administration’s border plan.

Twenty prototypes, out of designs submitted by as many as 450 companies, are soon set to be built along the San Diego border with Mexico.

“Winners will be selected around June 1,” reports the San Diego Union Tribune.

The Emergency Election Sale is now live! Get 30% to 60% off our most popular products today!


Related Articles